Sauna salt briquettes are used to create a more mineral-rich steam experience. As the heated salt comes into contact with water, its surface gradually dissolves while warm humid air spreads through the sauna.
Before using a salt briquette, always consider the design of your sauna heater and the heater manufacturer’s instructions.
Method 1: Using a Separate Heat-Resistant Container
This method keeps the salt briquette in a dedicated container among the sauna stones.
- While the heater is cold, carefully create a small space among the stones.
- Place a suitable heat-resistant container or bowl in that space.
- Remove the salt briquette from its packaging and place it inside the container.
- Return the stones to their proper position and heat the sauna.
- Once the heater and stones are thoroughly heated, a small amount of water may be applied to the salt briquette if permitted by your heater manufacturer.
Method 2: Using the Briquette on Suitable Sauna Stones
If this method is permitted by the manufacturer of your sauna heater:
- Remove the briquette from its packaging.
- Place it on the heated sauna stones without blocking important heater components.
- Allow the briquette to heat thoroughly. The source manufacturer instructions referenced for this article recommend approximately 80–90 minutes.
- Once heated, a small amount of water may be applied directly to the briquette.
- The surface of the salt gradually dissolves when exposed to water, creating warm, humid steam.
Before You Begin
Always review the instructions for your specific sauna heater. Heater designs differ, and a method that works with one heater may not be appropriate for another.
Avoid any setup that could allow salt or salt water to come into direct contact with electrical components.
When used properly, a sauna salt briquette can be an interesting addition to the sauna ritual and create a distinctive steam-room atmosphere.
